Operating Instruction
286426
31 / 48
EN
Switching the Appliance ON/OFF
1. Select the temperature setting and oven function using
the temperature controller.
The oven and thermostat indicator lights come on; the
oven is switched on.
See the table below for information on various oven
functions that can be selected.
2. When the thermal processing time has elapsed, rotate
the temperature controller and function controller to '0'
in order to switch the oven off.
ATTENTION!
If the oven is not working, the digital timer may have been programmed;
the display then shows 'A'. Abort the programming according to the
instructions in the 'Temporary Switching Oven OFF' section.
If the oven door is opened while the appliance is running, the thermostat indicator
light goes out. When the oven door is closed, the indicator light will automatically
come back on after some time.
Oven Functions
Cleaning function
This function can be used to clean the oven. By combining the top
and bottom heating elements and adding 300 ml of water to the
baking sheet, steam is generated in the cooking chamber. You can
find more information in the
'Cleaning Function'
section.
Turbo Convection
The air in the oven is heated by the hot air heating element. A fan on
the rear wall blows hot air into the oven. In this way, the food is
heated. You can bake on several levels at the same time, thus saving
energy. Thanks to the intensive heat transfer, you can select a
temperature of 20
–30°C lower than that specified in conventional
recipes.
Summary of Contents for 6K-EBMF
Page 1: ...6K EBMF 286426...
