Bartscher 6K-EBMF, Manual

Page: 22 / 50

Operating Instruction
20 / 48 286426
EN
Cookware Detection
• The electronic sensor registers the presence
or absence of a cookware piece on the hob. If
a cookware piece is not suitable for cooking
by means of magnetic induction or if a
cookware piece is too small, a corresponding
symbol appears on the display (figure to the
left).
• If a cookware piece is removed from the hob during the cooking process,
without the corresponding dial knob being set to the '0' position, the value
previously set and displayed on the corresponding display is automatically
replaced by the symbol.
• When a cookware piece is correctly put back on the hob, the symbol goes out
and the cooking process continues normally. Otherwise, the symbol also goes
out after 10 minutes.
• When the dial knob is rotated to any position before a cookware piece is placed
on a hob, the display will first show the set power output level and the cookware
detection symbol immediately afterwards. The hob remains in stand-by mode for
10 minutes. The cooking process starts if a cookware piece is correctly placed
on the hob during this time. Otherwise, the hob remains switched off and the
cookware detection symbol goes out. To switch the hob on again, the
corresponding dial knob must first be set back to '0' before selecting the desired
power output level.