- 38 -
o
The control panel must not become wet. You may wipe it by using a soft, damp cloth.
Make sure the door is open while cleaning the control panel in order to avoid
accidental engaging of the device.
o
You may wipe away condensed water that has formed at both sides of the door,
using a soft cloth. This may occur when the device is operated in areas with high air
humidity. Formation of condensed water is absolutely normal.
o
In order to dispose bad smells from the cooking chamber you may place a cup of
water together with the juice and the paring of a lemon in a microwave-proof
container and heat it for approx. 5 minutes. Afterwards you may wipe over using a
dry, soft cloth .
o
Only use a soft cloth and make sure you never use any kind of abrasive agents or
pads which could scratch the surface.
o
After the cleaning procedure, you should use a soft and dry cloth to wipe dry and
polish the surface.
7. Possible Malfunctions
In case the microwave does not function properly:
1. Make sure the device is connected properly to power supply. Pull the power plug out
of the socket and wait for approx. 10 seconds before proper reconnection.
2. Check if the fuse has loosened or the main fuse is disconnected. If both seem to
work properly, you may check up the connection (power supply) with a different
electrical device.
3. Make sure the wicket (door) is closed properly (Safety closure system), as otherwise
no hyper frequency waves are formed due to safety reasons.
In case none of the above mentioned failures occur, contact a qualified customer
service. Under no circumstances you should try to fulfill any kind of repair
operations yourself.
