- 31 -
5. Installation and operation
5.1 Positioning
•
Before the operation unpack the device and remove all package material and
protective foil from the device and equipment.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Place the device on a flat, stable surface which can support the weight of a
microwave oven, as well as heavy dishes and food products.
•
Do not place the device near flammable materials avoid high temperatures, moisture
and high humidity.
•
Never place the device on a flammable surface.
•
To ensure proper functioning, the device must have sufficient ventilation. For this
reason, it is necessary to maintain the following safe distances:
-
above the device: 20 cm
-
at rear of device: 10 cm
-
at sides of device: 5 cm.
•
Never block the ventilation ducts!
•
The device must remain a minimum distance of 2 m from radios, televisions, and
other such electronics in order to avoid interference with the signal reception.
•
Position the device so that the plug is readily accessible and if necessary can be
easily removed from its socket.
5.2 Electric connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate).
Connect the device only in case of compliance!
Connect the device only to properly installed single socket with protective
terminal.
Do not disconnect the supply cable by pulling it, always pull the plug.
