Bartscher 590LW, Instruction Manual

Page: 50 / 172

- 46 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem Cause Solution
No operation
(the device does
not work)
•
The plug is not correctly
placed in the socket.
•
Damaged socket
•
Damaged plug
•
The device is not
switched on
•
Properly place the plug in the
socket.
•
Check the device by plugging
in to another socket.
•
Contact the service
•
Switch the device on
The device is
switched on but
the temperature is
too high/too low
•
Too much frost on the
evaporator
•
Initiate defrosting
•
Dusty condenser
•
Clean the condenser
thoroughly
•
The door not closed tight
•
Check if the door is closed
and if the door seal is not
damaged.
•
The device is placed
near a source of heat
•
Make sure that the device is
installed away from any
source of heat
•
Ambient temperature
too high
•
Secure a good air circulation
where the device is installed
or place the device in a cooler
room
•
Food placed into the
device is too hot
•
Remove the hot food from the
device
•
The device is overloaded
•
Reduce the stored amount of
food and beverages
The device is
not water tight,
water flows out
•
The device is not levelled.
•
Level the device with the
adjustable feet
•
The drain outlet is blocked
•
Clean the drain outlet