Installation and operation
700276
19 / 24
EN
Before First Use
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section
6 'Cleaning'
.
2. To end with, dry the appliance and accessories thoroughly.
3. Introduce the shelves into the appliance at the selected height.
4. Plug the appliance into a suitable single socket.
The green power indicator light will come on.
5. Set the required temperature, observing indications in section
'Temperature
Control'.
6. Close the appliance door.
7. Before first use and before putting any beverages and food products into the
appliance, the appliance should reach the required temperature.
It takes approximately 2
–3 hours.
Temperature Control (Fig. 1)
The temperature is set by rotating the temperature controller (2) in the inner
chamber of the appliance. With closed refrigerator door, the set level may be read
on the temperature level display (3).
The temperature may be set in the range of 0
–5:
0
— compressor is disconnected.
ATTENTION!
The appliance is still connected to the power supply.
1
— the highest temperature (the weakest cooling)
5
— the lowest temperature (the strongest cooling)
NOTE!
If products in the refrigerator are too cold, set the temperature controller
to levels 1
–2. If products are chilled to an insufficient degree, use the
temperature setting of 3, 4 or 5.
Summary of Contents for 350
Page 1: ...350 700276...
