Installation and operation
700276
13 / 24
EN
Preparation of the Appliance
1. Remove the appliance from the foam pad.
2. Remove the adhesive tape from the exterior of the appliance.
ATTENTION!
The appliance is equipped with bolted door handle. If used incorrectly, it
may break off.
Do not use the door handle for raising nor for moving the appliance.
3. During installation, tilt a notch the front part of the appliance. It will make it
possible to easily move it on wheels to a chosen location.
4. Open the refrigerator door.
NOTE!
When opening the appliance door, a small red piece will fall out
— it is
needed for transportation purposes only.
5. Take two distance elements (included in
the delivery) from the bag (1).
6. Place two distance elements (1) in guide
rails (2) in the top section of the back
wall (Fig. 2).
Fig. 2
7. Remove lock from shelves (Fig. 3); they
are needed for transportation purposes
only.
8. Remove all shelves from the appliance.
Fig. 3
Summary of Contents for 350
Page 1: ...350 700276...
