- 27 -
5. Installation and operation
5.1 Installation
Positioning
Unpack the device, remove and dispose of all package material according to
the environment protection regulations.
CAUTION!
Never remove the nameplate and warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never
place the device on the flammable surfaces.
Do not place the device near open flame, electric heaters or other heat source.
Never
place the device in humid or wet environment.
When locating the device make sure there is a 10 cm gap from any walls or other
objects.
When locating the device, make sure the power plug is easily available to
immediately unplug the device when necessary.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
