Installation and operation
610837
19 / 36
EN
Clock Setting
1. Press the
button for at least 3 seconds.
The
'12H'
appears.
2. Rotate the Time/Menu rotary controller until the right hour is displayed.
3. Press the
button to confirm.
4. Rotate the Time/Menu rotary controller until the right hour is displayed.
5. Press the
button to confirm.
NOTE!
During thermal processing, you may check the current time by pressing
the
button.
Setting Time
1. To use the timer function, press the
button.
2. Rotate the Time/Menu rotary controller to set the time.
This function is available only in Standby mode and in microwave mode thermal
processing.
Example:
Let's assume that the timer is to be set for 5 minutes
— introduce and execute the
following via the control panel:
1. Press the
button once.
2. Rotate the Time/Menu rotary controller until the required time is displayed
(5:00).
3. Press the Start/Quick Start
button.
Attention:
The maximum time to be set is 95 minutes.
Time may be checked by pressing the
button.
To clear the timer, press the
button and then press the Stop / Reset
button.
Quick Start
Summary of Contents for 14250M-HLGR
Page 1: ...14250M HLGR 610837 ...
