- 30 -
•
Make sure there is a minimum distance of 10 cm between the rear and sides of the
device and the wall, in order to provide sufficient air circulation.
•
Never block the ventilation holes.
•
Plug the device so that the plug is easily accessible and can be quickly disconnected
from the power supply if necessary.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
•
Wait at least one hour until the coolant has settled before connecting the device to
the power supply.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
