Operating Instruction
46 / 68
117910
EN
The end of the pre-heating phase is indicated by an acoustic signal and the status
of the information bar changes to 'INSERT PRODUCT'.
Start of Baking Process
WARNING! Risk of scalding!
When opening the appliance hot air and steam may escape.
Always open the appliance door with caution, using the door handle.
Always use oven mitts and protective gloves to operate the appliance.
Never put hands without oven mitts into the appliance!
Never slide baking sheets into the oven without oven mitts.
During operation, the housing and appliance door become very hot and
remain hot still for a while after switching the appliance off.
Never touch the inside or outside of the appliance door and housing without
oven mitts.
Baking sheets get very hot during operation.
Never touch the baking sheets without oven mitts.
• Open the appliance door carefully. When opening the appliance door, move as
far away from the oven as possible, as hot air and steam may escape.
• Place the sheets with the products carefully on the baking surface and slide the
sheets backwards into the baking chamber. This is important so that the inner
glass pane is not damaged!
• Each product on a baking sheet must have sufficient space so that the hot air
and humidity can circulate unhindered around each product.
• Always place the baking sheets on the fireclay brick.
• Always use baking sheets that fit the oven and comply with the standards set by
the manufacturer.
• Always insert the baking sheets into the oven only after pre-heating.
• Close the appliance door.
• Press the
icon and the baking process starts. The 'BAKING' message is
displayed on the information bar.
Possible Actions and End of the Manual Baking Process
– The set temperature and baking time can be changed at any time.
