Installation and operation
12 / 16
114267
EN
Assembly
The assembly of the appliance should be carried out in the following steps (Fig. 2):
Fig. 2
1. Place the top lamp holder (3) on the lower frame tube (6).
2. Screw the top lamp holder with the factory-assembled infrared lamps (3) and
lower frame (6), left and right, using mounting screws (5).
The appliance is ready for use.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
Summary of Contents for 114267
Page 1: ...I3WL820 2 1 GN 114267...
