Installation and operation
114267
11 / 16
EN
5
Installation and operation
5.1
Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•
Never
place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Never place the appliance in the direct vicinity of walls, masonry, kitchen
furniture, or other objects. Make sure there is enough distance (at least 30 cm)
from walls and other flammable or prone to discolouration objects. Follow the
valid fire protection regulations.
• When it is not possible to maintain the recommended minimum distance, use
appropriate protection measures (e.g. heat-resistant foil) which assure keeping
the wall temperature in safe range.
• Keep the working area around the appliance clean and dry at all times.
Summary of Contents for 114267
Page 1: ...I3WL820 2 1 GN 114267...
