EN
page 27
Should the machine be fed with hot water supply (50°C), the heating process will take some 15 minutes.
Should the machine be fed with cold water supply (10°C), the heating process will take some 45-55 minutes.
The display
M
will read the set wash-tank and boiler temperatures (scrolling text).
The appliance is now ready for a wash cycle.
3.1.2 Operation
• Insert the rack fi lled with objects to wash (see paragraph
3.2
).
• Select the wanted washing cycle by pushing the START button
F
;
the display will show in sequence all these available programs. Once the wanted program is displayed, do release the button.
• Close the door: press the
START F
key. The indicator
A
will start fl ashing.
All wash-time long the display will read the wash-tank temperature and the boiler Below the temperatures indications line-
bar is displayed to show the progression of the wash-cycle ( scrolling text)
At the end of the washing cycle, a hot rinse cycle will take place. When the cycle is completed, the display
M
will indicate
the
CYCLE ENDED
.
NB:
At cycle-end, keeping the door closed, dishes will not dry. Take out the rack or keep the door open to allow evaporation,
helping the drying of the door.
When opening the door the message
CYCLE ENDED
disappeared. The machine is now ready for the next wash-cycle.
We recommend to change water at least twice a day, or whenever needed.
3.1.3 Switching OFF
• Turn the button
G
. The display will show
STAND-BY
.
To drain completely the wash-tank, remove the surface fi lter and take off the overfl ow
pipe. For machines equipped with drain pump see par.
3.5 Drain pump system
.
• At the end of the day, clean the machine (see chap.
6 Maintenance
).
• Shut the water valve.
• Switch the main power switch OFF.
55ºC - 82ºC
boiler 82ºC
cycle ended
stand-by
CYCLE 2 min
CYCLE 4 min
CYCLE 6 min
CYCLE 8 min
CYCLE 10 min
Pict. 1
