Operation and Maintenance Instructions
110644
23 / 32
EN
Automatic Program Start
With this function, the selected program runs immediately after closing the door. If
this function is not available in standard, it must be activated in the settings menu
beforehand.
To activate this function (Fig. 6):
1. Press and hold the
Start
key (4) with the appliance on and door open until 'AS'
is shown in the display.
2. To deactivate the function, press and hold the
Start
key (4) again for five
seconds with door open.
Bottom Sieve Removal
1. Rotate the lower wash arm perpendicular to the appliance door (Fig. 7).
2. Remove both sieves from the bottom of the wash-tank.
Draining the Appliance
1. Remove the bottom sieves (Fig. 7).
2. Pull the overflow upwards (Fig. 9B).
3. Close the appliance door.
4. Select the
dr
program.
5. Start the program, by pressing the
Start
key (3).
The appliance executes the end cycle with auto-cleaning and switches off at the
end.
6. If needed, remove the drain sieve and clean it (Fig. 8C).
Switching the Appliance Off
1. Press the
ON/OFF switch
(1) to switch the appliance off.
Three central segments in the
display
(4) remain on and indicate available voltage.
Summary of Contents for 110644
Page 1: ...RK401 LPWR 110644...
Page 3: ...Beschr eibung...
Page 4: ...EN 4...
Page 14: ...Technical Data 10 32 110644 EN 4 3 List of Components of the Appliance Fig 12...