Installation and operation
18 / 20
105829
EN
Temperature
1. Press the function selection button (5) to move from the power output mode to
temperature mode.
The appliance reaches the
factory-set default temperature that is shown on the
digital display
.
The temperature LED indicator light (2) goes on.
2. Set the desired temperature using the rotary control knob.
The following temperature settings are available:
60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C.
NOTE!
Any time during the operation, you may switch between the power output
mode and temperature mode by pressing the function key and selecting
the desired mode, power output or temperature, using the rotary control
knob.
3. When the cooking or warm-keeping process is finished, rotate the rotary control
knob to 'OFF' position.
NOTE!
The induction cooker switches off automatically when no new setting has
been introduced for 2 hours. The electronics cooling fan operates for
approx. 2 minutes.
Overheating Protection
The appliance is equipped with the
overheating protection
. When the critical
temperature is exceeded, the appliance will switch off for safety reasons.
ATTENTION!
Heating up an empty pan or frying pan activates the overheating
protection system; a acoustic signal will sound and the appliance will
switch off.
The digital display shows 'E2'.
Never place empty cookware on the hob.
When overheating protection is activated, remove cookware from the hob and
leave the appliance for a few minutes to cool down.
Then, you may start using the appliance again.
Summary of Contents for 105829
Page 1: ...IK 35 EB 105829...
