Bartscher 104523, Manual

Page: 29 / 35

Cleaning
104523 23 / 35
EN
If the appliance is not to be used for a long time:
– switch the appliance off and disconnect it from power and water supply;
– remove the produced ice from the storage container;
– drain the entire water;
– perform thorough cleaning;
– leave the door (lid) of the storage container slightly open.
Service Cleaning
Condenser
In order to maintain performance and extend the life of the appliance, clean the
condenser regularly; the condenser is located under the front cover of the appliance
(Fig. 16).
Proceed the following way:
– screw the front cover retaining screws off;
– remove the front cover;
– clean the condenser with a soft brush or a vacuum cleaner;
– use the screws to secure the front cover to the appliance.
ATTENTION!
Do not use brushes nor blunt objects to clean the condenser.
Water Inlet Filter
The water inlet filter must be regularly cleaned, observing the blow indications:
– close the water shut-off valve;
– unscrew water supply tube;
– use tweezers to pull the water inlet filter from the socket at the inlet of the
solenoid valve;
– clean the water inlet filter under running water;
– fit the water inlet filter;
– fit water supply tube.