- 24 -
4.3 Features
-
Air cooling
-
Paddle system
-
Electronically controlled compressor
-
Light sensor controlled ice cube production
-
With water supply and outlet
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not put any objects into the device. Do not touch any moving or electrical parts
inside the device.
•
Do not tilt the device over on angle of 45° (also during transp ort) so the compressor
does not get damaged.
•
Never place the device on its side or head, only transport it upright.
•
Always move the device carefully and do not expose to hard impacts.
•
Do not expose to bad weather conditions.
•
Do not store any kind of inflammable, toxic or loose objects in the ice cube maker.
