- 30 -
•
Before connecting the device to the power supply, set the temperature dial to „0“
position.
•
Connect the device to a single grounded socket.
•
Set the appropriate temperature for the relevant food
product using the temperature dial.
→
To increase the temperature of the food
product set the values: 8 - 12.
→
To decrease the temperature of the food
product set the values: 1 - 8.
•
Smooth temperature dial (1-12) ensures the contents of the kettle are heated at
regular intervals.
•
The green control light is on during the heating phase. When the desired
temperature is reached, the control light goes off and comes on again when the
temperature inside the stainless steel insert pot drops again.
Note:
Heating time depends on the amount and temperature of food
products and temperature of water in the outer pot.
Serving food products
WARNING! Risk of burns!
Open the lid carefully, because during heating the steam gathers under
the lid during heating. The steam and spilled water may cause burns!
•
Open the lid and using the ladle serve warm food directly from the soup kettle.
•
After removing the food, close the lid again to avoid heat loss.
•
When finished using the device, turn the temperature dial to the „0“ position
and unplug the device from the socket (pull the plug!).
The device is equipped with a function preventing it from overheating/
operating when dry. If the device is accidentally turned on without water or
with too little water, the safety mechanism will be activated and the device will
be automatically shut off. In this case, turn the device off (set the temperature
dial at „0“ position), remove the plug from the socket and wait for it to cool
down. After cooling, fresh water may be poured in and the device can be used
normally.
