background image

 

 

 

- 22 - 

  Pour 2.0 litres of water (up to the „MAX“ marking) into the external pot. Do not pour 

more than 2.0 litres of water, otherwise some will spill over when the insert pot is 
placed inside.

 

NOTE! 

Shorten heating time by pouring warm water, cold water takes longer to heat up.

 

 CAUTION! 

Never turn the soup kettle on with an empty external pot. 

 

  Prepare the desired dishes and place the warm (hot) food in the insert pot. Place the 

insert pot through the carrying rim. Hold the carrying rim and place the insert pot into 
the external pot.

 

  Place the lid on the soup kettle. 

  First, connect the power cord to the device’s socket, then insert the plug into a single 

grounded socket. 

  Turn the device on using the ON/OFF switch located on the rear wall. 

 

  Set the appropriate temperature for the dish to be heated. The yellow heating control 

light will come on.

 

  The adjustable temperature dial allows for heating of 

water in the external pot at regular intervals. The yellow 
heating control light comes on during the heating phase. 

 

When the set temperature is reached the control light 
goes off, and it comes on again when the 
temperature in the external pot falls.

 

  Heating time depends on the volume and temperature of food and of water in the 

external pot. 

  Open the lid to serve food as desired. 

 

  After serving food, close the lid again to avoid heat loss. 

  When finished using the device, set the temperature dial all the way to the left by 

turning it counter-clockwise and remove the device’s plug from its socket. 

 

  The unit is equipped with a function protecting against operating while dry. If the 

unit is accidentally turned on without water or with too little water in the internal pot, 
the protection function is activated and the unit automatically shuts off. 

 

The red control light for protection against operating while dry will come on.

 

If this happens, turn the unit off via the ON/OFF switch located on the rear wall of the 
unit and wait for it to cool. After it has cooled, fresh water can be poured in and the 
unit can be used normally.

 

Summary of Contents for 100048














Reviews: