Cleaning
14 / 18
100054
EN
During heating-up the green heating-up indicator light is on.
NOTE!
The heating up time depends on the amount of the content and the
temperature of food, as well as on water temperature in the external tank.
8. Open the lid and set it wide open.
9. Remove the warm food from the party kettle and serve.
10. After serving food, close the appliance lid to limit heat losses.
11. If the appliance is not be used any more, set the output controller to '0' position.
12. Disconnect the appliance from power supply (pull the plug out).
Dry-Run Protection / Overheating Protection
The appliance is equipped with the
dry-run protection / overheating protection
.
In case of accidental start-up without water or with its insufficient amount, the
protection will be activated and the appliance will be automatically switched off.
Should this occur, plug from the socket. Wait for the appliance to cool down. When
cooled, re-fill the external tank with fresh water and start using the appliance as
usual.
6
Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
Cleaning
1. Clean the appliance after each use.
2. Remove the lid of the appliance.
Summary of Contents for 100.054
Page 1: ...9L 100054...
