4
OPERATION
PRIOR TO OPERATION:
1.
Set the drain hose to drainage.
2.
Plug the power supply cord into the mains but be sure to check first of the voltage corresponds to the
rating label of the appliance.
3.
Insert the water inlet hose into the water inlet connector.
4.
Select the water your level according to the quantity of laundryby referring to water level marking.
WASHING:
1. Water Inlet:
Select the water lever to the desired position.
2.
Add in water and dissolved detergent to make the water reach the expected level.
Operate the machine to stir the detergent evenly by turning the WASH KNOB.
3.
Put in your laundry and select the wash duration according to the weight of the
laundry.
4.
Select the washing type (Normal/Stronger) according to the weight of the laundry.
After each washing operation ends, set the washing selector to DRAIN.
DRAIN THE WATER:
Since the washing machine has a drain pump, the water will flow faster upon turning the
Drain Selector to the DRAIN position. Be sure to turn the Drain Selector immediately
back the NORMAL position when the water is completely gone from the wash tub.
Summary of Contents for 99806
Page 4: ...3 PARTS DIAGRAM AND LIST ...
