![background image](http://html1.mh-extra.com/html/bartell/innovatech-terminator-infinity-2-0/innovatech-terminator-infinity-2-0_manual_3963725007.webp)
P a g e
|
7
OIPB-I01029-Infinity2.0_v1.2
3. Important Safety Instructions
WARNING: When using electric tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS
1. Safety Instructions for All Tools
• KEEP GUARDS IN PLACE
and in working order.
• REMOVE ADJUSTING TOOLS AND WRENCHES.
Form habit of checking to see that
keys and adjusting wrenches are removed from the Terminator
®
before turning tool on.
• KEEP WORK AREA CLEAN.
Cluttered areas invite accidents.
• KEEP CHILDREN AWAY.
All visitors should be kept a safe distance from the work area.
• WEAR PROPPER APPAREL.
No loose clothing, gloves, neckties, rings, bracelets or
other jewelry to get caught in moving parts. Non-slip footwear is recommended. Wear
protective hair covering to contain long hair.
• ALWAYS WEAR SAFETY GLASSES.
Also use a face or dust mask if operating in a
dusty environment. All users and bystanders must wear eye protection that conforms to
ANSI Z87.1. (CAN/CSA Z94.3)
• MAINTAIN EQUIPMENT WITH CARE.
Keep equipment clean for best and safest
performance. Follow instructions for lubrication and changing accessories.
• DISCONNECT BATTERY
before servicing.
• REDUCE THE RISK OF UNINTENTIONAL STARTING.
Make sure handles are centered.
• USE RECOMMENDED ACCESSORIES.
Consult the instruction manual for
recommended accessories.
• NEVER STAND ON TOOL.
Serious injury could occur if the machine is tipped or rocked.
• CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced. Do not use tool if
switch does not turn it on and off.
• NEVER LEAVE EQUIPMENT RUNNING UNATTENDED.
TURN POWER OFF.
Don’t
leave equipment until it comes to a complete stop.
• DO NOT OPERATE ELECTRIC TOOLS NEAR FLAMABLE LIQUIDS OR GASSES OR
EXPLOSIVE ATMOSPHERES.
Motors in these tools may spark and ignite fumes.