VIBRATORY PLATE COMPACTORS INSTRUCTION MANUAL
BARTELL MORRISON INC.
BARTELL MORRISON (USA) LLC
375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
25 INDUSTRIAL DRIVE, KEYPORT, NEW JERSEY, USA, 07735, 732-566-5400 FAX 732-566-5444
Created: 11/10
Revised: 06/13
- 8 -
Routine Service Intervals
Due to the nature and environment of use, plate compactors could be exposed to severe operating
conditions. Some general maintenance guidelines will extend the useful life of your machine.
The initial service for your compactor should be performed after 25 hours of use, at which time your
mechanic (or authorized repair shop) should complete all of the recommended checks in the schedule
above. The chart on page 6 (six) is handy for keeping a record of the maintenance performed and the parts
used for servicing your compactor.
Regular service according to the schedule above will prolong the life of the plate compactor and prevent
expensive repairs.
Keeping your plate compactor clean and free from debris is the single most important regular maintenance
operation, over and above the checks in the service schedule above, that can be performed. After each use
your compactor should be cleaned to remove any dust and debris from the undercarriage and surrounding
components. Use of a power washer will make clean up quick and easy, especially if a non-stick coating
was applied prior to use.
In the Service Schedule above, items that should be checked, replaced or adjusted are indicated by “o” in
the appropriate column. Not all plate compactor models include the same features and options and as such
not all service operations may have to be performed. For ease of recording place a checkmark (
) through
the “o” when the item is complete. If an item is not required or not completed place an “x” through the “o” in
the box.
All compactors have governed engine speed of 3600 rpm. See engine manufacturer’s manual for exact
specifications. Care should be used when making any adjustments to the compactor not to change the
governed speed. Running the engine at lower rpm’s will result in a decrease of compaction force and lower
travel speed. It will create excessive “out-of-synch” vibrations resulting in poor compaction, maneuverability,
excessive wear to the machine, and discomfort to the operator.
Failure to have your vibratory plate compactor regularly serviced and properly maintained in accordance with
the manufacturer’s instructions will lead to premature failure and void the warranty.
