Bartell Global S151, Owner'S Manual

Page: 7 / 20

S151, S201
OWNER'S MANUAL
6
OI-M09205
SPECIFICATIONS
Introduction
TO THE OPERATOR:
DO NOT OPERATE THE BARTELL MORRISON POWER SPRAYER UNLESS
YOU HAVE READ AND STUDIED THIS MANUAL CAREFULLY.
REMEMBER THAT YOU ARE THE KEY TO SAFETY. GOOD SAFETY
PRACTICES NOT ONLY PROTECT YOU, BUT ALSO THOSE WORKING
AROUND YOU. MAKE THIS MANUAL A WORKING PART OF YOUR SAFETY
PROGRAM.
For safe operation of the power sprayer, you must be a qualified and authorized
operator. To be qualified, you must understand these written instructions, have
training, including actual operation of the power sprayer and know the safety rules
and regulations for your job site.
An operator should never use drugs, alcohol or any other substance which can
change his/ her alertness or coordination.
This manual is complied from information available and current at time of approval for
printing. Bartell Morrison Inc. reserves the right to improve its products without giving
prior notice or incurring any obligation.
1. Morrison Power Sprayer
The Morrison Power Sprayer is ideal for spraying all types of curing compound on
bridge decks, highways, floor slabs, drainage channels, etc, after finishing work is
completed. Easily handles form oils, pigmented curing compounds, bond
breakers, soaps and detergents, pest control liquids, and most liquid type
material.
It is powered by a dependable Honda engine and comes with 25’ (7.6m) of 3/8”
(0.95cm) hose with an adjustable spray nozzle.
S151 S201
Engine Honda 3.2 HP (GX120) (2.4 kW)
B&S 3.5 HP (XR550) (2.6 kW)
Pressure 40-120psi
Hose Lengths
25’ (7.6m)
50’ (15.2m)
75’ (22.8m)
Flow Rate 8gal/minute (30L/min) OR
.03
–.05 gal/min (3.8 – 6.4 oz/min)
Weight 120lbs (55kg)
Max Solids 20% 40%