V1.2 TECH550PRO
Page 16
June 2022
TECH550PRO USER GUIDE
RITE
S
YNC
®:
RITE-SYNC® allows the Technician to install a NEW RITE-SENSOR® into a vehicle just like the OE sensor, and during the
RELEARN Process, “sync” that sensor to the Make-Model-Year selected, keeping the RELEARN process the same as using
an OE sensor. This means that there is no need for the extra step in Programming the sensor before installing it within the
W/T assembly.
•
No longer forgetting to program the sensor.
•
Keeps process consistent.
•
Sensor programs in Wheel and under pressure!
*RELEARNS listed with RITE-SYNC® still support other sensors, both OE and Aftermarket. Other programable sensors used
will need to be pre-programmed before the RELEARN process. Other brands of programable sensors do not support
programming at the wheel and tire or under pressure.
Note:
Stnry RITE-SYNC = Stationary Relearn process with RITE-SENSOR® Support
OBD RITE-SYNC = OBD Relearn process with RITE-SENSOR® Support
Drive RITE-SYNC = Drive (Auto) Relearn process with RITE-SENSOR® support (activate sensors before drive)
Process (RITE-SYNC®):
1.
Configure the Make-Model-Year (see VINdicate® TSB for more info)
2.
Select the Relearn Process
3.
Follow the process with Activating the LF/RF/RR/ and LR wheel locations.
4.
Tool will “RITE-SYNC®” any new RITE-SENSORS® automatically.
Note:
Test Sensors diagnostics for RITE-SENSOR
®
Tool will declare an un-synchronized RITE-SENSOR® if found and will inform the technician it can be sync’d in the Relearn
process.