TECH 1000
Quick Start Guide
R-PRT-356
Rev. 1.4 JAN 2020
Support (866) 407-8767
Copyright 2020 Bartec USA, LLC.
TOOL LAYOUT
POWERING TOOL
To power the Tech1000 on, simply press
the power button on the right side of the
tool till the LED on the front of the tool
illuminates. The tool will quickly boot to
the HOME screen.
To power the Tech1000 off, quickly press
the same power button which will launch
a power off menu. Choose from Power
Off, Sleep, or Cancel.
Off - shuts tool completely off.
Sleep - puts tool to sleep, but maintains
Bluetooth connection and quickly
resumes with a tap of the power button.
The timing of this can be changed in the
tool settings.
TOOL SET-UP
The Tech1000 MUST be set-up before
use.
If at any time the tool is powered off
during the Set-up process, the set-up
process will automatically start over.
To Set-up the tool, you will need
access to a Wi-Fi network.
The tool will
prompt you through the following
selections: Language, Region,
connecting to your Wi-Fi network, and
connecting to your current or creating a
new registered tool account via Service
Center.
See bartecusa.com/tech1000 for the Wi-
Fi requirements document
QA
DATE
To view the full Tech1000 User Guide and other product info:
www.bartecusa.com/tech1000
To view your inspection data
servicecenter.bartecusa.com
To view your registered tools account
tools.bartecusa.com
TOOL SETTINGS
Access the tool’s settings by
tapping SETTINGS on the
HOME screen. Make all the
appropriate changes under
Connections, Service
Center, Services,
Measurements, General and
Users.
Note - Language, Date and
Time need to be set as
they affect terminology
and reporting.
SERVICE CENTER
Service Center is a cloud based site that works
directly with the Tech1000, and the basic
version is included with the annual tool
software license. On-line storage for inspection
data, on-tool registration, and tool updating via
a Wi-Fi connection are all functions of Service
Center.
Once an account is created, you can access
Service Center using the link shown below.
Existing users can use their Bartec Registered
Tools account and add this tool through the on
tool set-up application by entering their User
Name and Password.
New users can use the on tool set-up
application to create a new account
Congratulations!
The Tech1000 is Bartec’s latest innovation in TPMS tools! The user interface is very similar to that
of a smart phone or tablet. Use the touch screen to launch applications or begin a service. At any
point swipe down from the top of the screen to get access to the tool shortcuts. Please see online
User Guide for additional user information.
A Wi-Fi connection is required to register and update the Tech1000. Please make sure you
have your router name and password before starting.
Charge your tool to at least 50% before you start.
(NOTE: your tool cannot be used while charging - Always use the power supply that your kit
came with to prevent damage to your tool)
QA
DATE
0
5
25
75
95
100
R-PRT-356 Tech1000 QSG rev 1_4
Tuesday, January 28, 2020 4:46:32 PM
