background image

TC78

ex

-NI 

- Touch Computer 

Type B7-A2D*-****/******** 

 

Operation 

 

Subject to technical changes. 
October 2023 

43/52 

 

8.1.4

 

Charging the device/the battery 

 

A standard battery charges from fully depleted to 90% in approximately 2 hours and from 
fully depleted to 100% in approximately 3 hours. In many cases, a 90% charge provides 
enough charge for daily use. Depending on the usage profile, a full 100% charge may 
last for approximately 14 hours of use. 

 

8.1.4.1

 

Charging the main battery in the device with base or charging station 

1.

 

Charge the battery only outside hazardous areas. 

2.

 

Connect the base or charging station to the appropriate power source. 

3.

 

Insert  the  device  into  a  slot  to  begin  charging.  Ensure  that  the  device  is  properly 

seated. 

4.

 

The device turns on and begins charging. The Charging/Notification LED blinks amber 

while  the  device  is  charging  and  then  turns  solid  green  when  the  device  is  fully 
charged. 

    

 

 

AC power cable 

Power supply 

DC connecting cable 

Device charging slot 

Power LED 

Spare battery charging slot 

 

 

Charging the Touch Computer with the mounted Scan handle is possible. 

 

 

 

Summary of Contents for TC78ex-NI





























































Reviews: