Bartec MC 9090ex-G User Manual Download

Page: 9 / 60

User Manual

MC 9090

series

Technical data subject to change without notice.
Issue 03/2010

Page 9

The Mobile Computer is a hand-guided electrical device used for the mobile acquisition, processing and radio transmission
of data in hazardous areas. The Mobile Computer is used in areas of Class I, II and III Div 2.

The MC 9090

series is specially intended for use in Class I, II and III Div 2, Group A, B, C, D, F and G.

It is not allowed to use the MC 9090

in Class

, II and III Div 1.

Data access is possible in real time

Lithium-ion storage batteries allow maximum operating time between chargings

WLAN radio technology IEEE 802.11a/b/g

Bluetooth

Additional memory with an SD card

Different scan engines allow different barcode applications

Replaceable keypads in 3 variants

1.2

Use

1.3

Advantages

Summary of Contents for MC 9090ex-G





























































Search results

Summary of Contents for MC 9090ex-G

Reviews:

Related manuals for MC 9090ex-G

Brands by name

Popular brands

Bartec MC 9090ex-G, User Manual

Search results

Summary of Contents for MC 9090ex-G

Reviews:

Related manuals for MC 9090ex-G

Brands by name

Popular brands