Operational Instruction
(Translation)
Switch module
Type 07-3323-1.00
BARTEC
GmbH Max-Eyth-Straße 16
97980 Bad Mergentheim
Germany
Tel.: +49 7931 597-0
Fax: +49 7931 597-119
[email protected]
www.bartec.de
Reservation Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
EN 1/4
Explosion protection
Technical data
ATEX
Ex protection type
II 2G Ex d e IIC Gb
I M2 Ex de I Mb
Certification
PTB 99 ATEX 1043 U
IECEx
Ex protection type
Ex d e IIC Gb
Ex d e I Mb
Certification
IECEx PTB 07.0046U
UL
Ex protection type
Class I, Zone 1, AEx de IIC/Ex de IIC, T6
Class I, Div. 2, Groups A, B, C, D
Certification
UL E184198
Ambient temperature ranges
-55 °C to +60 °C
(-67 °F to +140 °F)
Approved for the zone
1
Protection class
Determined by actuating element and control
unit enclosure.
Terminals: IP 20
Weight
Approx. 87 g (0.19 lb)
Rated insulation voltage
690 V
Rated voltage
AC 230 V and 400 V
DC 24 V and 110 V
Storage / transport temperature
-55 °C to +70 °C
(-67 °F to +158 °F)
Enclosure material / manufacturing
process
Thermoplastic / injection moulding
Contact material
AgSnO
2
Contacts
1 N/C contact and 1 N/O contact or 2 N/O
contacts or 2 N/C contacts
AC-12: 16 A, 400 V
AC-15: 10 A, 400 V
DC-13: 0.5 A, 110 V
DC-13: 1 A, 24 V
Conventional thermal current
16 A / +40 °C (+104 °F)
11 A / +60 °C (+140 °F)
Connection
Terminal for 2.5 mm², fine-wire
Service life
Mechanical: > 10
5
switching cycles
Mounting
Locked, by bayonet lock
Dimensions
See page 3
01
-3
32
3-
7D
00
01
/B
-0
2/
13
-S
T
V
T
-2
92
80
7
Note on instructions
When working in hazardous areas, the safety of
personnel and equipment depends on com-
pliance with the relevant safety regulations. The
people in charge of installation and mainten-
ance bear a special responsibility. It is essential
that they have an exact knowledge of the
applicable rules and regulations.
The instructions provide a summary of the most
important safety measures and must be read by
everyone working with the product so that they
will be familiar with the correct handling of the
product.
The instructions have to be kept for future
reference and must be available throughout the
expected life of the product.
Description
The switch module, type 07-3323-1.00, is used
everywhere in almost all hazardous areas
where machine functions are to be activated by
pressing a button or actuating a switch.
The switch module is equipped with self-
cleaning contacts featuring positive break
operation.
The connection is established by means of
terminals at the back of the switch module.
The switch module is designed for combining
with different actuating elements. It is attached
without tools to the actuating element.
The actuating element is inserted into a
mounting hole in an Ex e enclosure, a control
console or control panel. The easy installation
of the actuator allows conformance to a high IP
degree of protection.
