T e c h 4 0 0 S D E
User Guide R.59
2 0 1 9
P a g e
| 7
CORRECT USE OF THE TECH400SDE TOOL
In order to use the TECH400SDE tool safely:
•
Do not expose the TECH400SDE to excessive moisture.
•
Do not use the TECH400SDE near sources of heat or polluting emissions (stoves,
ovens, etc.).
•
Do not drop the TECH400SDE.
•
Do not allow the TECH400SDE to come into contact with water or other liquids.
•
Do not open the TECH400SDE or attempt to perform maintenance or repair operations
on any internal parts.
•
You are advised to keep the packaging and to re-use it if the TECH400SDE is moved
to another site.
When using the TECH400SDE tool remember:
•
Do not subject the TECH400SDE tool to magnetic or electric interference.
Reception, maintenance and guarantee:
Inspect the tool when delivered. Damage sustained during shipment is not covered by the
guarantee. Bartec will accept no responsibility for material or bodily harm resulting from
inappropriate use of the product, failure to maintain it, or incorrect storage conditions.
Bartec provides training for clients desirous of acquiring the knowledge required for the correct
use of its products.
Only personnel authorized by Bartec are permitted to make any repairs that may be necessary.
This tool is guaranteed against any manufacturing fault for 12 months as of date of invoice
(parts and labour) only if product has been correctly used. Serial number must stay readable.
Bartec Auto ID Ltd
Redbrook Business Park
Wilthorpe Road
Barnsley
S75 1JN
+44 (0) 1226 770581