manualshive.com logo in svg

Bartec Auto ID TECH400SDE, User Manual, Page: 19 / 52

Share
Download
Bartec Auto ID TECH400SDE User Manual Download Page 19

T e c h 4 0 0 S D E  

User Guide R.59 

2 0 1 9  

 

P a g e

| 19  

 
 
 

During testing, the screen confirms the sensor type being tested and displays a 
progress  bar.  The  screen  width  shows  the  maximum  possible  time  for  a 
successful  read  -  different  makes  of  TPM  respond  at  different  speeds/  time 
intervals.  
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

 
 
 

 

P

OSSIBLE 

R

EADING 

S

CENARIOS 

 

 

If there is a faulty TPMS sensor, or the read fails for another reason, an X will be 
displayed in that wheel position, and the arrow will not automatically move on 

–

 this is so that the read can be retried, possibly with the tool repositioned. 

 

 

Successful Sensor Read 

TPMS sensor was successfully activated and 

decoded. Displays pressure (in Bar or PSI) 

at wheel location.

 

 

Failed Sensor Read 

No Sensor Activation or Decode. May be 

wrong sensor fitment or non-functioning 

sensor. Tool will prompt you to attempt 

reading the sensor 3 times.

 

 

Duplicate ID 

A sensor with a duplicate ID has been read. 

The tool will direct you to re-read 

those sensors. 

 

Searching 
 
 
 
Receiving Data:

 

Summary of Contents for TECH400SDE





















































Reviews:

No comments