2
w w w . b a r s k a A u d i o . c o m
Notes Before Installation
Important: The speaker power supply on AC 100V-240V~50Hz/60Hz
Note: Any damage caused by improper power supply voids warranty
Safety precaution:
Warning: To avoid fire hazard or electric shock, do not expose the
speaker to hot or humid areas
Note: To avoid danger of electric shock, do not dissemble the
speaker. There are no spare parts inside for repair purposes. For
repairs, please contact Barska Audio.
1. Read this manual carefully
2. Keep this manual in proper place
3. Beware of all warnings
4. Follow all instructions
5. Do not operate the speaker near water
6. Do not install the speaker close to or that can produce heat
7. If necessary, use a dry cloth to clean product
8. Do not block any vent outlets by following installation manual
9. Do not damage safety polarity plug or grounded plug. There are two ends on polarity plug. The third one is grounded
end to ensure safety grounding. If the plug cannot plug into socket, please change the socket.
10. Do not step on product, especially the power cord plug, socket and voltage supply outlet
11. Use only parts from original manufacturer
12. Unplug the speaker when not in use for an extended period of time or in situation of lighting storm
13. If machine malfunctions such as power or socket damage, fluid or foreign body fallen inside machine, raindrop or
humidity caused malfunctions be sure to contact Barska Audio
14. To ensure ventilation around machine, keep distance at least 1.20” all around machine. Do not block ventilation areas
Be careful when opening the box. If there is any sign of damage during transport, please contact Barska Audio
immediately. Keep all packing material intact. Keep receipt as it is required for warranty.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter
Bolt Mark Icon
The speaker shell is exposed to
danger of non-insulated voltage
Exclamation Mark Icon
Important operation and maintenance
procedures according to instruction
This mark on speaker means double
insulation
speaker_manual_BC385.indd 2
3/25/14 2:37 PM
