8
Read all instructions before using this door lock
WARNING
- New door lock is in Factory Default mode, ANY fingerprint can open the door lock. Only successful registered fingerprint and
PIN code can terminate Factory Default mode.
- For security purposes, register fingerprint and change the factory default code as soon as possible. Default pin code is 12312312312.
- Door lock can be opened by either Fingerprint, PIN code and/or Emergency Keys.
- If user resets door lock to Factory Default mode: Any fingerprint can open the door lock Default pin code is 12312312312.
- Register fingerprints and PIN code and test a few times before closing the door.
- Test with a non-registered fingerprint. If the door lock opens, the door lock is still in Factory Default mode.
- Test the Emergency Keys and store them in a secure place.
- To maximize the security and performance of the door lock, test registered fingerprints every 6 months.
- Do not mix old and new batteries.
- Intended for indoor use only; keep fingerprint scanner clean.
PARTS OF THE DOOR HANDLE
A. Fingerprint Scanner
B. Indicator Lights
C. Keypad
D. Handle
E. External Power Socket
F. Battery Cover Button
G. Battery Cover
INSTALL BATTERIES
1. Press in the Battery Cover Button and gently lift the Battery Cover to expose the battery compartment.
2. Insert 4 new Alkaline AA batteries into the Battery Compartment and pay attention to the polarity of the batteries.
3. Gently replace the Battery Cover back into place.
NOTE: Do not mix old and new batteries.
FINGERPRINT REGISTRATION
Initial Registration
Please register an Admin Fingerprint to start door lock operations. In order to do so press “0,” place any finger on Fingerprint Scanner,
Press “1” then press “1” again and place and hold admin finger on fingerprint scanner until green indicator light flashes.
Successful Registration Green Indicator Light will flash.
Unsuccessful Registration Red Indicator Light will flash.
Module stores 10 Admin Fingerprints.
90 User Fingerprints.
20 Guest Fingerprints.
Register Admin
Press “0,” place admin finger on Fingerprint Scanner, Press “1” then press “1” again and place and hold admin finger on fingerprint
scanner until green indicator light flashes.
Register User
Press “0,” place admin finger on Fingerprint Scanner, Press “1” then press “2” again and place and hold user finger on fingerprint
scanner until green indicator light flashes.
B
E
C
A
G
D
F
0
1
2
3
