6
Installing the back plate and
back lock body gasket
1. The back plate fits into the back lock body gasket
2. Secure the back plate and back lock body gasket with two M5*L screws
Installing the back lock body
1. Connect the cable as shown
2. Push the wire connector into the hole under the latch
3. Secure the back lock body with two M4*8 screws and one M4*L
Battery
1. Put the batteries in and install the battery cover
2. Handle lever is field changeable, assemble or disassemble the handle lever
with the tool supplied.
Note: field changeable handle lever
5
7
6
M4X7(mm)
Hexagonal screws
