APPLICATION HINTS
Pinpointing the Target
Accurately pinpointing a target makes digging it up easier. But it takes practice.
We suggest you practice finding sample on your own property before you search
other locations.
Follow these steps to pinpoint a target.
1. When the detector detects a buried
target, continue sweeping the
search coil over the target in a
narrowing side-to-side motion.
2. Make a visual note of exact spot
on the ground where the
detector beeps.
3. Stop the search coil directly over this point on the ground. Then move
the search coil straight forward away from you and straight back
towards you a couple of times.
4. Repeat steps 1~3 at a right angle to the original search line, Make
a mark of “X”. The target will be directly below the “X” at the point of
the beep response.
FACTORS THAT AFFECT THE DETECTING
It’s difficult to have an accurate detecting result. Sometimes the detecting may be
restricted by some factors.
If you detect patiently and correctly and practice more times, you’ll get
satisfactory result.
CARE AND MAINTENANCE
Your metal detector is an example of superior design and craftsmanship. The
following suggestions will help you care for your metal detector so you can enjoy
it for years.
- Handle the detector gently and carefully. Dropping it can damage
circuit boards and cases and can cause the detector to work
improperly.
- Use the detector only in normal temperature environments.
Temperature extremes can shorten the life of electronic devices,
damage the cases of the detector.
- Keep the detector away from dust and dirt, which can cause
premature wear of parts.
- Wipe the detector with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the detector.
- The angle of the target buried in
the soil
- The depth of the target
- The level of oxidization of the target
- The size of the target
- Electro-magnetic and electrical
interference surrounding the target
12
www.barska.com
13
www.barska.com