10
11
1 YEAR LIMITED WARRANTY
SAFES
BARSKA warrants this new safe to be free of original defects in material and/or
workmanship under normal use for a period of twelve (12) months from the date
product is received by purchaser. This warranty does not include damage caused by
improper installation or maintenance. Damage from misuse, abuse, accident (such
as dropping), fire, flood, or acts of nature. Damage from service or repairs other than
those performed by BARSKA. Labor, cost and shipping charges for the removal and
replacement of defective parts beyond the initial twelve-month warranty period.
All transportation and shipping charges. Removing or altering the seal under any
circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not transferable. This warranty
applies only to products purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for Return Merchandise
Number (RMA#) before any returns. The RMA number must appear on the outside
of the shipping package. Product must be packed carefully and sturdily in its original
packaging to prevent damage in transit and returned freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA products for service and/
or replacement:
1. Please write your complete details (Name, Address, Telephone #,
E-mail address, RMA#, etc.)
2. Proof of Purchase or the notarized document (must send the original Notarized
Document by mail, copies will not accepted)
3. A brief explanation of the defect.
4. A Check/Money Order to cover inspection, shipping and handling.
Charges are as follows
$95 - Large
$75 - Standard
$60 - Compact
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or replace defective
part(s) or units with new part(s) or a new unit if necessary within the warranty period.
Purchaser is required to remit amount above to BARSKA for return shipping and
handling at time product is returned.
If repair is required after warranty period expiration, purchaser will be charged for
replacement parts and return shipping.
BARSKA® shall not be liable for any consequential, incidental and/or contingent
damages whatsoever. We will not pay shipping, insurance or transportation charges
from you to us, or any import fees, duties and or taxes. This warranty supersedes all
previous BARSKA warranties.
BC586
TROUBLE SHOOTING
The lock has no response (no beeps)
- Make sure the battery wire in the keypad housing are not pinched and
are connected.
- Make sure you are not in Time delay mode.
- Replace the existing battery with new one.
CARE AND MAINTENANCE
- Keep liquids away from the control panel. Spills on the control panel will cause
damage and possibly electric shock.
- Secure safe in a proper area to prevent from falling and causing damage or injury.
- DO NOT disassemble the product. For all repairs, contact BARSKA
Customer Service.
- DO NOT use chemicals or cleaning agents to clean the safe.
MOUNTING INSTRUCTIONS
The safe may be mounted down to the floor. Be aware of the load bearing. Failure to
do so can result in personal injury and/or damage to property. Use appropriate tools
when performing work and always use eye protection.
Floor Mounting
- Use proper drill tools depending on the type of floor you are mounting the safe
(wood, tile, or concrete).
- Measure the location of the pre-set drill holes; mark their exact position onto
the floor.
- Drill the appropriate size holes for the anchors you are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the safe and securing to anchors;
ensure the safe is mounted securely.
