Barry-Wehmiller Streamfeeder Value Series, Manual

Page: 31 / 58

25
V
alue
S
erieS
V-710iJ M
anual
6
Inspection and Care
Please read this Section to learn how to:
• Visually inspect your machine to detect part problems which may
require adjustment or replacement.
• Periodically care for your machine to prevent any operational prob -
lems.
! ! !
Visual Inspection
Checking for Timing and Drive Belt Wear
Check for visual signs of:
• Fraying. Replace as required.
• Missing teeth. Replace as required.
• Cracking. Replace as required.
• Paper residue buildup. Clean belts, especially in grooves.
Checking for Feed and Discharge Belt Wear
Check for visual signs of:
• Walking. Replace as required.
• Cracking. Replace as required.
• Thinning. Replace as required.
When performing initial feeder adjustments
prior to operation, always make sure you turn
Off the main power switch and disconnect all
equipment from the electrical power source.
Failure to do so can expose you to a potential
startup, and therefore moving parts which can
cause serious injury.
Do not attempt to make any adjustments while
the feeder and machine of application are
running. Failure to do so can expose you to
moving parts which can cause serious injury.
Do not wear loose clothing when operating the
feeder.
Avoid making adjustments with loose or
unsecured parts. This can potentially damage
parts.