Barrus X05, Operator'S Manual

Page: 26 / 88

RDG603B2
– Issue 1
Page 26 of 88
Figure 19: Battery Connections
•
The outboard motor voltage is 48v (one EB-4830 or one EB-4850 Lithium-Ion battery).
•
The table below shows the minimum battery and equipment specification required for
the different outboard motor models.
•
To stop safety risks, capacity losses and contact point losses, only the same type of
batteries (same manufacturer, same capacity, same age and same charge condition)
should be used together.
Differences in the charge condition of batteries wired in series can
cause high compensatory currents or overloads which can damage the cables,
connectors or battery. In extreme situations this can cause fires and injuries.
8. Battery Features (EB-4830 / EB-4850)
Battery Management System (Built into the battery structure)
•
This prevents damage by over-charging and over-discharging. Also, in the case of a
short circuit.
•
If any of these situations occur, the battery will simply cut out. The display will
Model
Minimum
Cable Size
Minimum Battery Isolation
Switch Specification
5hp / 10hp
Outboard
25mm² 300A 48V
Anderson Type
Cable Connection
Battery Isolation
Switch