RDG603A9 - Issue 1 - Shire 14 Workboat Owners Manual 30, 40, 50
Page 11 of 40
Ensure that the anti-vibration mount centre screw is sufficiently raised so as not to
touch the engine bed. If this occurs, excessive engine vibration will be experienced
through the hull.
Care should be taken to install mounts parallel to the engine rails and washer and locknut
firmly tightened on the cover of the mount. The maximum distance from the top of the
locknut to the base of the adjusting nut must not exceed 5mm; any greater adjustment
should be made up using shims below the mount.
