Fig.
3
LP22-SMK, LP24-SMK, LP14-SMK
Surface Mount Kit Installation Instructions
20070146
R
EV 1 - 11/19
2
800-533-3948 www.barronltg.com
1. Locate the area where light panel will be installed Fig. 3.
2. Assemble (4) sides of surface mount kit, insert (8) small screws into corresponding holes and tighten Fig. 1.
3. Check squareness of assembled surface mount kit frame and trial insert light panel from back to check fit. Remove
light panel.
4. Position assembled surface mount kit frame on mounting surface and mark locations of frame mounting holes Fig. 2.
5. Attach the assembled surface mount kit frame to the mounting surface with appropriate hardware.
6. Remove one end of mounted surface mount kit frame.
7. Position light panel and make electrical connections per light panel instructions and codes Fig. 3.
8. Insert light panel into frame end and re-assemble frame end and secure with screws Fig. 4.
9. Check function and security of installation.
10. Surface mounting kit installation complete.
Fig. 1
Fig.
4
Fig. 2
