INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
10070211 Rev 1 - 08/18
2
RM2 Series
ORANGE
/RED
BLACK
BLACK
TEST
SWITCH
LAMP LAMP
BLACK
WHITE
277 VAC
120 VAC
COM
+
-
BLUE
RED
BLUE
YELLOW
BLUE
YELLOW
BLUE
AC ON
LED INDICATOR
RED
WIRING DIAGRAM
9. Reattach the trim plate assembly to the back box by pinching together the spring clips and hooking them into the
slots located on the outside of the back box.
10. Carefully reconnect the LED indicator light, ground wire, wire harness and battery connections.
Warning:
Connect battery only after continuous AC power can be provided to the unit.
11. Secure the trim plate assembly to the back box with the two screws (removed in step 1).
Adjust the lamp heads to the desired orientation.
WIRING
Make electrical connections as follows:
White - Common
Black - 120VAC
Orange/Red - 277VAC
Important:
Electrical connections should be made inside junction box (supplied by others).
Caution:
Failure to cap unused wires may result in shock hazard or unsafe condition as well as equipment failure.