900E Series
Installation Instructions
10070152 REV L - 10/19
3
800-533-3948 www.barronltg.com
Pendant Mount
1. Secure the mounting bracket to the
mounting surface using (2) screws
(not provided).
2. Thread a lock nut on one end of the
extension rod. Tighten the lock nut so it is
not able to spin freely.
3. Guide the end of the extension rod with
the lock nut through the opening in the
mounting bracket so that the extension rod
is supported by the mounting bracket and
hangs freely. Ensure that the lock nut is
centered in the mounting bracket and lies
flat. Incorrect placement of the lock nut may
result in failure.
4. Guide the pendant canopy onto the
extension rod in the orientation shown.
Once in place at the top of the extension
rod, tighten the set screw of the pendant
canopy to secure.
5. Thread a lock nut on the bottom end of the
extension rod. Tighten the lock nut so it is
not able to spin freely.
6. Punch out the center knockout of the J-box and thread it onto
the extension rod as shown. Thread the washer onto the
extension rod and secure with a lock nut.
7. Follow the steps outlined in the
Surface Ceiling, Surface Wall,
or Flag Mount
section to finish installation. Use the steps for
surface ceiling mounting.
Pendant
Canopy
Extension
Rod
J-box
Mounting
Plate
Mounting
Bracket
Canopy
