QuadAir Multiplayer Hockey Table
Instruction Manual
17
For assistance call:
1+(716) 866-0054
Troubleshooting
Having trouble assembling your new table?
Call our experts in the Parts and Service Department (1+716-866-0054) or
and we will be happy to assist you!
Glossary of Common Errors
•
5V and 12V Power Supplies: The 5V and 12V power supplies regulate and
disperse power to the PC boards, LEDs, and other electronics. The 5V and
12V power supplies are separated to ensure that there will not be any power
instability between components. (*Note: Left is 5V; Right is 12V)
•
Counters: The counter records the number of games played, coins inserted,
or tickets dispensed (depending on model and equipment).
•
Display Panel Light and Puck Chute Light Control Cards: These cards
control the display panel and puck chute lights.
•
Optical Goal Sensor: Check the PC Board error lights to make sure the
optical goal sensor light is not on.
•
PC Board: The PC Board controls the game operation. All adjustments to
time, goals, or lives (depending on model) are made using this PC Board.
Errors can be diagnosed using the error lights found near the top of the board.
•
Voltage Issues: Voltage issues may be due to a card swipe system attached
to the table which is causing the power supply to be unstable. Card swipe
systems must be attached to their own power supply.
The 12V/5V power supply which is in the table can have its output adjusted
by using the knob (called a “trimpot”) on the front of the power supply. Check
the voltage coming out of the power supply. If you are not using a card swipe
system, adjust the trimpot by rotating it clockwise or counter-clockwise as
necessary to increase or decrease the output.
