8
1
Self closing hinges are included with all gates. Make sure hinges are set in the
proper direction to accommodate either left or right handed gates or provide an
inside or outside swinging gate. The post that will have the gate hinges screwed
to it will be the (thick walled) "heavy-duty gate post".
4
5
Once four or so panels are installed, check to make sure all posts and
panels are still level. If a correction needs to be made, use a rubber
mallet while the concrete is still somewhat soft.
After concrete has set, fasten the fence section to the posts using
#8 x 1" self-tapping screws.
CAUTION
: Be careful not to over-tighten screws.
Gate Installation
2
Once the concrete has completely set around the gate post(s), gates may be hung.
Set the hinges on the gate. Line up the top of hinge with top of top gate rail. Line
up bottom of bottom hinge with bottom of bottom gate rail. Drive two 1
1
⁄
11
4
⁄⁄ " self-
tapping screws through upper hinge into gate
gate (use the inside holes for this step).
Repeat for bottom hinge.
Gate
Gate Post
Opening Direction
Opening Direction
