19
SPECIFICATIONS
3
Aux Control Head / BoB Connector
These pins are dependant on hardware revisions. Revisions are marked in the table
below as Ax where x is the revision number. The revision number can be viewed
under Settings < System Info < Version Information.
1. VCC
2. CAN Bus positive pin
3. CH Audio+
4. Rear
5. Ground
6. Ground
7. CAN Bus negative pin
8. CH Audio-
9. Rear speaker-
10. CAN bus termination
11. Control Head detection
12. not connected
13. USB+ (A11 or later)
14. USB- (A11 or later)
15. USB 5V (A11 or later)
11
12
13
14
15
1
2
4
5
6
7
8
9
10
3
Connectors
Standard Connectors:
12V DC Power Supply
boom mic socket (female XLR)
Ethernet (RJ45)
USB 2.0
PTT (6.35mm mono)
Headphone (3.5mm 4 position jack (TTRS))
Dimensions
185mm (l) x 270mm (w) x 105mm (h)
For specifications regarding the operation of the Barrett 4050 HF SDR Trans
-
ceiver Control head, please refer to the Barrett 4050 HF SDR Transceiver Oper-
ating Manual (P/N BCM40500).
