13
The Desktop Console must be configured into ‘Remote Head Mode’ to func
-
tion correctly via network. The following instructions lay out how to configure
a desktop console to Remote Head Mode when connected via a network:
Enabling Remote Head Mode
1. Ensure the desktop console is
connected via a 12VDC power
supply via the input on the rear
of the console.
2. A communication error may
occur as the console will
attempt to connect to a
transceiver. Acknowledge the
dialogue box.
(This will only appear if the
Desktop Console was not pre-
viously in Remote Head Mode).
3. Swipe from the left edge of the
screen and select Settings.
4. From Settings,
long press
the
Network icon. This will unlock
the ‘Remote Head Mode’ fea
-
ture in the Network menu.
5.
Select ‘Remote Head Mode’
and select ‘Enabled’.
