Setting the first page of channel parameters :-
Selcall enable and format select
Scan enable
Low power
The
key selects the selcall format required for the channel being
programmed. Select the letter or symbol corresponding to the selcall format required. This
letter or symbol is displayed on the bottom line of the display in the 1st character position.
Barrett Australia format selcall is selected.
CCIR 493 (WA2 Australia) format selcall is selected.
Australian RDD format selcall is selected.
When no letter or symbol is displayed in this position, no selcall is selected on the channel
being programmed.
Use the scan key to select the scan table required. Select the symbol corresponding to the
scan table required. This symbol is displayed on the bottom line of the display in the 2nd
character position.
Scan table 1 enabled for this channel
Scan table 2 enabled for this channel
Scan table 1 & 2 enabled for this channel
No symbol displayed in this position indicates this channel will not be programmed for scan.
The
key selects the RF power setting required.
The low power symbol
will be displayed on the bottom line in the 4th character position.
when low power is selected for this channel. No symbol in this position indicates that normal
high power is selected.
BARRETT 950 HF TRANSCEIVER
PAGE 72
