Barrett 4000 Series Networking Manual Download Page 23 | Manualshive

Page: 23 / 65

background image

23

WIRELESS SETUP SCENARIOS - SCENARIO 2

SCENARIO 2 - WiFi Client Mode

In this scenario, the transceiver is configured as a WiFi Client. The transceiver

logs into an access point/router, (for example, “BCGuest”) and The workstation

connects to the same WiFi access point/router as the transceiver. This allows the

operator to program the transceiver via the Barrett Programming Software, or

use the Barrett 4050 Remote Control app to access all the functionality of the

transceiver from their workstation.

Barrett 4050 HF SDR Transceiver (P/N BC4050000)
•  WiFi Adapter (P/N BCO40508)
•  Setup as WiFi Client
•  DHCP

WiFi Link

WiFi Access Point/Router (not supplied)
• DHCP Server
Workstation with WiFi link to Access Point (not supplied)
• Barrett 4050 HF SDR Programming software installed (P/N USB-

40001)

• DHCP
• Barrett 4050 Remote Control application

(P/N BCO40516)

• Install Bonjour for discovery

«
...
21
22
23
24
25
...
»

Summary of Contents for 4000 Series


































































Reviews:

No comments

Related manuals for 4000 Series

Brand: StarTech.com Pages: 2

USB External Sound Card Adapter

Brand: StarTech.com Pages: 9

Brand: Radio Shack Pages: 36

Brand: cable matters Pages: 2

Brand: Allied Telesis Pages: 2

Brand: Genelec Pages: 2

isysNet ControlNet A Series

Brand: Parker Pages: 8

Brand: LM Technologies Pages: 27

FRITZ!Powerline 510E Set

Brand: AVM Pages: 38

Quatech SSP-100

Brand: B&B Electronics Pages: 40

eXtreemeRAID 3000

Brand: LSILogik Pages: 24

Brand: POPCORN HOUR Pages: 2

Brand: Motorola Pages: 59

Brand: Motorola Pages: 6

Brand: Motorola Pages: 2

Brand: Motorola Pages: 2

Brand: Motorola Pages: 2

Brand: Motorola Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands