30SG OPERATOR’S MANUAL 4/23/19 Page 8 of 23
CONTROLS (continued)
4. CUTTER WHEEL CONTROL: To start the cutter wheel, hold down the thumb button on the control
handle. Then pull the trigger back. After the wheel is started,
the thumb button can be released
, but the
trigger must be held to keep the cutter wheel turned on. To raise the cutter head, pull the cutter height
control bar back. To lower the cutter head, push the cutter height control bar forward. The cutter head
swings to the left and right by moving the control lever left or right.
CUTTER HEIGHT TRIGGER THUMB BUTTON
CONTROL LEVER
5.
PARKING BRAKE: It is located behind the left hand track motor. Move the handle down to engage the
brake, and up to disengage it.
